ASA Powder ADX-885
Iimpawu zeMveliso
1. Imveliso ineplastiki ekhawulezayo, i-fluidity elungileyo kunye nokusebenza kakuhle kokusebenza.
2. Nge-AS resin kunye ne-PC resin njengesiseko sezinto, imveliso inokumelana nempembelelo ephezulu.
3. Iglosi ephezulu kunye nokumelana nemozulu entle.
4. Imveliso ifanelekile kwii-resin ezahlukeneyo ze-AS.Ingasetyenziswa kwifilimu ye-AS calendering, i-AS extrusion, i-PC extrusion, i-injection molding kunye nezinye iindawo.
Impahla Ephathekayo
| Ipropati | Isalathiso | Iyunithi |
| 20 Uvavanyo lweMesh | 99 | % |
| Umlinganiselo | 0.3-0.5 | g/cm3 |
| Umba oguquguqukayo | ＜1.5 | % |
*Isalathiso sibonisa nje iziphumo eziqhelekileyo ezingaqwalaselwanga njengengcaciso.
Imizekelo yokusetyenziswa kweFomula
| Igama | (LG 80H) AS intlaka | ADX-885 |
| Umthamo/g | 65 | 35 |
Ukusebenza koomatshini
Indlela yoVavanyo: I-Extrusion granulation--Ukulungiswa kwe-spline ngokubumba inaliti--Uvavanyo lokusebenza
| Into | UvavanyoIindlela | UvavanyoIimeko | Iyunithi | Inkcazo yobuGcisa(ADX-885) | Inkcazo yobuGcisa(Thelekisa Isampulu) |
| Amandla empembelelo | GB/T 1043 | 23℃ | KJ/m2 | 15.50 | 10.00 |
| Tensile strength | GB/T 1040 | 10mm/min | MPa | 36.15 | 35.89 |
| Tensile Break Extension Ipesenti | GB/T 1040 | 10mm/min | % | 20.70 | 29.30 |
| Ukugoba Amandla | GB/T 9341 | 1.0mm/min | MPa | 65.70 | 66.90 |
| Ukugoba iiModyuli ze-elastic | GB/T 9341 | 1.0mm/min | MPa | 2113.9 | 2140.2 |